GILLETTE MEDICAL EVALUATION LABS -- PAPERMATE W10/M15 PERMANENT MARKERS, BLACK  -- 7520-00N065140
<pre>=====================  Product Identification  =====================

Product ID:PAPERMATE W10/M15 PERMANENT MARKERS, BLACK
MSDS Date:06/11/1991
FSC:7520
NIIN:00N065140
=== Responsible Party ===
Company Name:GILLETTE MEDICAL EVALUATION LABS
Address:401 PROFFESSIONAL DR
City:GAITHERSBURG
State:MD
ZIP:20879
Country:US
Info Phone Num:301-590-9781
Emergency Phone Num:301-590-9781
CAGE:9A977
=== Contractor Identification ===
Company Name:GILLETTE MEDICAL EVALUATION LABORATORIES
Address:1413 RESEARCH BOULEVARD
City:ROCKVILLE
State:MD
ZIP:20850
Phone:301-424-2000
CAGE:9A977

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPYL ALCOHOL; (1-PROPANOL). FL PT:59.0F,15.0C. LEL:2.1%.
    UEL:13.5%
CAS:71-23-8
RTECS #:UH8225000
OSHA PEL:200 PPM
ACGIH TLV:S,200 PPM/250 STEL

Ingred Name:DYES
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:RESIN
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:NONE ANTICIPATED
    UNDER NORMAL USE CONDITIONS. INGESTION:NONE ANTICIPATED UNDER
    NORMAL USE CONDITIONS. IF MISUSED, AS SUCKING TIP END OF MARKER FOR
    EXTENDED PERIOD OF TIME, SOME IRRITA TION/DISCOMFORT MAY OCCUR.
    SKIN:CONTACTWILL DYE SKIN. ABSORPTION:NONE ANTICIPATED UNDER NORMAL
    USE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CONDITIONS. IF PRODUCT COMES IN
    CONTACT WITH SKIN, POSSIBILITY OF ABSORPTION EXISTS, BUT NOT IN
    TOXIC AMOUNTS. EYE:NONE UNDER NORMAL USE CONDITIONS. IF PRODUCT
    CONTACTS EYE, CAN EXPECT SOME C ONJUNCTIVAL/CORNEAL IRRITATION.
    CHRONIC:NONE LISTED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . EYES:FLUSH IMMEDIATELY WITH WATER FOR @ LEAST 15 MINUTES.
    IF IRRITATION PERSISTS, CONSULT PHYS. SKIN:WASH W/SOAP & WATER. INK
     STAIN WILL EVENTUALLY WEAR OFF. INGEST:WASH MOUTH OUT WITH WATER.
    CONSULT PHYS IF IRRITATION/DISCOMFORT PERSISTS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:59.0F,15.0C
Lower Limits:SEE ING 1
Upper Limits:SEE ING 1
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:1-PROPANOL IS FLAMM. IF LG AMTS OF
    PRODUCT ARE INVOLVED, PLASTIC MAY ALSO GIVE OFF HAZARDOUS
    DECOMPOSITION PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP WITH TISSUE, TOWEL, ETC.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CAP ON MARKER TO PREVENT SOLVENT
    EVAPORATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:NONE.
Eye Protection:NONE.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:0.84-0.86 (H*2O=1).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:207F,97C
Melt/Freeze Pt:M.P/F.P Text:-197F,-127C
Vapor Pres:21 @ 77F
Vapor Density:2.1
Spec Gravity:SUPDAT
Evaporation Rate &amp; Reference:1 (BUTYL ACETATE =1)
Solubility in Water:COMPLETE
Appearance and Odor:COLORED LIQUID WITH ALCOHOLIC ODOR.
Percent Volatiles by Volume:>70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE LOCAL,
    STATE AND FEDERAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.